www.amptronth.com


Untitled-2

ѷ

Դ

  ǴԹ Control Modules

CANopen-PLC IL 5504, IN 5504

With PLC function
According to IEC/EN 61 131-2, EN 50 178
Operation as  master 
  - Operation as  salve
  - Transfor rate up to 1 Mb/s
  - Interface according to DS301 version 3.0
IN 5504 locally extendable with digital and analog
  - in-outputmodules
2 digital inputs for DC 24 V
- 2 Relay outputs

- LED indicators
Standard programming software CoDesys under Windowsaccording
  to IEC/EN 61131-3:

- Instruction set
- Lader diagram
Function block diagram
- Sequential function chart

- Structured text ( similar to Pasca )
128 KB Flash memory for user program
128 KB RAM for user data
16 KB battery buffered RAM for no-voltage safe data
Battery buffered real time clock
Monitoring contact for RUN status of the PLC
IL 5504:35 mm width
  IN 5504: 52,5 mm width

Standard type: IL 5504.22 DC 24V
- Article number: 0054104

- 2 relay outputs
- 1 monitoring contact

- 2 digital inputs DC 24 V

- CANopen interface
- Auxiliary supply UH: DC 24V

- Width: 35 mm

Standard type: IL 5504.22 DC 24V
- Article number: 0054104

- 2 relay outputs
- 1 monitoring contact

- 2 digital inputs DC 24 V

- CANopen interface
- Auxiliary supply UH: DC 24V

- Width: 52.5 mm

                                                                                         ´

Interface module HC 3096, HL 3096 safemaster

According to IEC 255, VDE 0435 part 201
With positively guided contacts according to DIN EN 50 205
Safety relay soldered on board
Optionally plug-in HA 5611 on socket HC 3096/100 and HA 5612
  on socket HL 3096/100 Optionally with free-wheeling diode across
  A1/A2
Max. 6 output contacts 
Contact material AgNi10 + 0,2 mm Au
Wide temperature range :-25 ... + 55
°C
HC 3096: width 18 mm
HC 3096: width 38 mm

Standard type: HC 3096.52 DC 24 V
  Article number: 0049269

- 2 NO, 2 NC contacts
- Contact material AgNi 10+0,2 μm Au
- Width: 18 mm

Standard type: HL 3096.18 DC 24 V
Article number: 0048894
- 3 NO, 3 NC contacts
- Contact material AgNi 10+0,2 μm Au
- Width: 38 mm

                                                                                        ´

Interface module HL 3094 - safemaster

According to IEC 255, VDE 0435 part 201
With positively guided contacts DIN EN 50 205
safety relay soldered on board
Optionally plug-in type HA 5601 on socket HL 3094/100
Optionally with free-wheeling diode across A1/A2 
Low nominal consumption 0,75 W
Max. 4 output contacts
Contact material AgNi10 + 0,2 mm Au 
Optionlly AgNi10 + 5 mm Au or AqCd 0 + 0.2 mm Au
Hight thermal current Ith : 8A
Wide temperature range: -25 ... +55
°C
Width 38 mm
 

Standard type: HL 3094.52 DC 24V
  Artikel-Nr. : 0047426 stock item 

- 2 NO, 2 NC contacts
-
Contact material AgNi 10+0,2 μm Au

- Nominal voltage UN: DC 24 V
- Width: 38 mm
                                                                                       ´   

Interface relay IK 3070, Interface relay system I_ 3070

According to EN 61 810
Relay, triac or transistor output
Protective separation according to VDE 0106 part 101 on
  devices with relay output
LED as operating position display 
Optionally input wiring with recovery diode or MOV 
Optionally for small switching currents
Optionally with positive guided contacts As option with 3-position
  test switch:

- Ato, off, Manual/Sensor control ( + 24 V ) As option with

  semiconductor output
- for high switching frequency
- input protection with varistor

Optionally interface relay system to reduce the amount of wiring
IK 3070: 17,5 mm width
IS 3070: 140 mm width

Standard type: IK 3070.02/002 DC 240V
Article number: 0045093
stock item
- Output: 2 NO contacts
- Nominal voltage UN: DC 24 V

- with operating position display ( LED )
- Width 17,5 mm

                                                                                           ´

  ˹ҷ | 1
www.amptron.th.com, www.amptronth.com
9 ྪ 77 ¡ 4 ྪ ǧ˹ͧҧ ࢵ˹ͧ ا෾ 10160
  Tel : 66-2809-5588, Fax : 66-2809-5599 E-mail : sales@amptron.th.com